Porch Swing DIY

Spread the love

This post – Porch Swing DIY-  has been compensated by Collective Bias, Inc. and its advertiser. All opinions are mine alone. #DoMoreWithMission #CollectiveBias

Porch Swing DIYOne of the things I love most about the warm weather is working on outdoor projects. The boys and I spend a lot of time in the backyard, so my ultimate goal is to turn it into a beautiful oasis. This is a pretty lofty goal considering that this property didn’t have a single flower or blade of grass planted when I moved in! It may be a slow process, but with each DIY project, this space gets a step closer to the picture in my head. I’ve been dreaming of a Porch Swing DIY all winter, so I knew that was the first project I wanted to tackle.

There are so many benefits to DIY-ing these outdoor projects. I save money, hone my construction skills, spend quality time with Indigo and take in the beauty of nature. The downside? Working in hot, humid days! Today, I teamed up with Mission to put their Instant Cooling Gear to the test!

Mission Instant Cooling GearMission Instant Cooling Gear lets you do more in the heat. This gear cools you off instantly and it lasts for hours! How does it work? Simply wet with water thoroughly. Wring out the excess water. Wave in the air for 15-20 seconds (for the hats) or snap 3 times (for the towel and neck gaiter) to activate cooling. Just repeat the steps to re-activate.

My family has fair skin, so we always wear hats when it’s sunny. The Mission Cooling Bucket Hat and Performance Hat are a total upgrade from the ones we’ve been using! Both styles have UPF 50 Sun Protection and cool up to 2 hours. They’re soft, lightweight and comfortable to wear. Best of all, the cooling technology comes from Mission’s innovative fabrics…not chemicals!

Click the above image to shop Mission Instant Cooling Gear!

The cooling towel and neck gaiter are ideal for extra cooling. Bonus – you can pull the neck gaiter over your nose and it protects your face from sawdust when cutting wood!

Mission Instant Cooling Gear

Use the discount code GINA25 to save 25% on your purchase of Mission Instant Cooling Gear!

Mission Instant Cooling Gear

Porch Swing DIY

Looking for your new favorite outdoor spot this summer? This porch swing is it!

Note: I countersank all the visible screws and filled the holes. Once a few coats of semi-transparent stain were applied, the screw holes weren’t visible at all. If you are planning on leaving the wood natural or if you’re applying a light stain, the screw heads will be visible. To avoid this, you can use pocket holes.

Supplies needed for Porch Swing DIY:

Pressure treated 2 x 4 x 8 – 5 total

Pine 1 x 4 x 8 – 4 total

3-inch exterior screws

2 ½-inch exterior screws

Wood filler

Semi-transparent exterior stain

Finish nails

Cut the wood into the following pieces:

2 x 4, 12 inches long – 2 total

2 x 4, 18 inches long – 4 total

2 x 4, 20 inches long – 4 total

2 x 4, 22 3/8 inches long – 2 total

2 x 4, 48 inches long – 3 total

1 x 4, 48 inches long – 8 total

Porch Swing DIYTo make the bottom of the swing, lay the 48-inch pieces on their side, parallel to each other. Put the 18-inch pieces on their sides to create a rectangle. Screw together using 3-inch screws. Add the other 2 18-inch pieces to the middle and screw together.

Porch Swing DIY

To make the back, lay the last 48-inch long 2 x 4 on its side. Lay 2 of the 20 inch 2 x 4s at the ends. Screw through the top of the 48-inch 2 x 4 into the 20-inch on both sides.

Porch Swing DIY

Stand the back up against the bottom. Screw together at the bottom sides. Line up the other 20-inch pieces with the middle of the joists and screw in place.

Porch Swing DIYTo make the seat, take the 1 x 4s and nail them to the bottom, leaving approximately half an inch of space between the boards.

Porch Swing DIY

Take the last 1 x 4 and screw it on to the back using the 2 ½-inch screws, 6 1/2 inches down from the top.

Porch Swing DIYTo make the armrests, screw the 12-inch 2 x 4 on to the front of the swing. Screw the 22 3/8 2 x 4 on top and from behind the swing to secure.

Fill holes and paint.

Porch Swing DIYTomorrow, I’ll show you how I built the stand and hung the porch swing. Be sure to check back!

Looking for more Home DIYs?

How to Make a Weathered Plank Wall

DIY Playhouse Platform

Porch Swing DIY

What summer projects are you excited to tackle? I’d love to hear!

Similar Posts

Leave a Reply